SafeStart 800 series

Engine Heater SafeStart 800 series

Contact heaters

Safe and efficient contact heaters for engine blocks and oil pans.

Description

Contact heaters are divided into two groups:

– Heaters for engine blocks
– Heaters for oil pans

Contact heaters consist of an element cast in aluminum, which is adapted to fit the installation point. Contact heaters for oil pans heat the oil instead of the coolant. The rise in engine block temperature produced by a contact heater for oil pans is therefore not comparable with an engine heater which heats the coolant. A heat-conducting paste is applied to the contact surfaces to improve transference of heat from the heater to the engine block or oil pan.

Use

Normal usage – DEFA engine heaters are designed for “normal usage.” DEFA defines “normal usage” as; 3 connections for 3 hours pr. Twenty-four hours for 150 days (5 months) a year.

Professional use – For use emergency vehicles or other vehicles where the heater is in use continually, yearly controls are necessary. It might be required to install a replacement heater. DEFA AS will not cover the yearly service cost.

NOTE! Pulse power – Some parking facilities use interval (pulse) power timers that turning the power On and Off several times per hour. Using a DEFA engine heater in combination with these timers is NOT considered “Normal use” and claims will be declined.

Technical description

DEFA AS conforms to the requirements of both ISO 9001- 2008, ISO 14001:2004 and OHSAS 18001:2007. In addition, our engine heaters and cables conform to the requirements of ISO/TS 16949:2002.

IP rating
IP44