MultiCharger 1210 Flex battery charger, front, white background
MultiCharger 1210 Flex battery charger, laying, white background

MultiCharger 1210 Flex Lithium

Onboard charger
Item no: 450019
See specifications
Shortcuts:

Description

MultiCharger 1210 Flex Lithium is a 12V/10A maintenance charger that is adapted to modern battery technology and prolongs battery life. It is more compact than similar chargers in the category and fits well in modern engine compartments. Due to the flexible cables, the battery charger is easy to install.

  • Only charge lithium batteries with an integrated Battery Management System (BMS).
  • The chargers advanced electronics makes it possible to stay connected to 230V continuously. When charging, batteries must have periodically inspection.
  • The LED at the top of the charger is blinking with a green light when the battery is charging. When the battery is fully charged, the LED will be continuously lit. The LED will blink with a red light if there is an error.
  • The charger has a 230V outlet which might be used to connect two chargers, or as an outlet for other DEFA equipment.
  • The charger is short circuit- and polarity protected, assumed that the enclosed fuse is installed.
  • Charging of batteries in closed areas must be avoided cause of explosion danger. The charger contents of high voltage current and must therefore not be opened or drilled in.

Technical description

The charger is tested and satisfies the standards:
EN 60335-2-29:2004 + A2:2010, EN 60335-1:2012 + A11:2014, EN 62233:2008, EN 55014-1:2006 + A1:2009 + A2:2011, EN 61000-3-3:2013, EN 61000-3-2:2014, EN 55014-2:2015

DEFA AS is conforming to the requirements ISO 9001, ISO 14001, ISO 45001 and IATF 16949.

Voltage
Rated output/power
Charging current
Operating temperature
Charging voltage
Maintenance charging
IP rating
Efficiency
PlugIn outlet
Fuse
Weight
Dimension
230V 50-60Hz
165W
10A
-40°C / +40°C
14,4V @ 25°C
13,8V
IP65
90%
230V - 16A
15A
394gr
HWD: 107/71/42

Mounting

When charging a 24V system you have to use two 12V chargers. On the 230V side two chargers may be connected directly together or you may place the chargers separate with a PlugIn cable in between. It is most important that each charger secures using a fuse and is connected to separate batteries. The 12V outlet on the charger must not be series circuit.

It is most important that the charger is installed in accordance with the installation guide and that DEFA´s original connection equipment is used, see specific installation guide.

Downloads

450019_MultiCharger 1210 Flex Lithium EN (pdf)