Electrical preheating
EV charging solutions
eConnect™ Mode 3
eMove® Mode 2
Lighting
Cabin heating and security
Chargers and inverters
Security & Tracking
MiniPlug inlet cable
MiniPlug connector.
Patented 230V AC connector, for installation into the car's body. Small, discrete and installation-friendly.
Length
Colour
Description
The DEFA MiniPlug was developed with ease of installation, optimal user-friendliness and safety in mind. It is suitable for all new vehicles.
Fitting equipment is included.
The DEFA inlet cable consists of an armored cable with the DEFA PlugIn contact in one end and the DEFA MiniPlug contact (with cover) in the other. An extra earth cable is also fitted to the PlugIn end. It is easily flush-mounted.
Technical description
The MiniPlug inlet cable is part of various cable kits, as well as DEFA WarmUp and ComfortKits.
DEFA AS conforms to the requirements of both ISO 9001- 2008, ISO 14001:2004 and OHSAS 18001:2007. In addition, our engine heaters and cables conform to the requirements of ISO/TS 16949:2002.
Variant
704561
704559
704558
460939
460915
460901
Length
Colour
Weight
Pcs. in collection box
Voltage
Current
IP rating
Certification(s)
2,0m
Orange
0,570kg
12
250V
16A
IP44
EN 60309-1
1,5m
Orange
0,410kg
18
250V
16A
IP44
EN 60309-1
1,0m
Orange
0,250kg
20
250V
16A
IP44
EN 60309-1
2,0m
Black
0,570kg
12
250V
16A
IP44
EN 60309-1
1,5m
Black
0,410kg
22
250V
16A
IP44
EN 60309-1
1,0m
Black
0,250kg
22
250V
16A
IP44
EN 60309-1
Mounting
Use & Installation
There are two options for installing the DEFA MiniPlug:
- Flush in the front of or the body of the vehicle
- Mounted on the holder in existing receptacles on the front of the vehicle
The enclosed holder can be positioned in several ways. The contact can be painted in the color of the vehicle on request, thus making it virtually invisible when flush-mounted.
If at all possible, the inlet cable’s MiniPlug (B) contact should be mounted so that the MiniPlug front faces downward at an angle. This assists drainage. The MiniPlug connector must be installed where it will be protected from water and mechanical damage. The DEFA MiniPlug connecting cable must be easy to connect.
Install according to the accompanying installation guide.
Maintenance
Apply silicone spray on the contact terminals before and after the season. Ensure that neither the cable or cover is damaged. Install a new cable if the cover is damaged.