LedgeCircle® D300 – Essential

Modern wall and ceiling fitting based upon newly developed edge-lit technology, which in spite of the very small sizes contains a variety of alternative control systems. High quality, IP-class and top rated light distribution in combination with a discreet design makes the fitting ideal both in official and private premises. LedgeCircle is available in 2 sizes, both in several versions, which makes the fittings suitable in various application areas.

Application area

All-purpose fitting for entrance, stair, corridor, reception area, lounge, waiting room, toilet, bathroom etc.

Materials

Powder painted aluminium front in white, RAL 9016. Driver, diffuser and luminous back part in UV- stabilized impact resistant polycarbonate.

PIR OnOff

Infrared motion sensor which turns on and of after movement. The hold time can be set in steps from 8-sek to 25-min, preset on 10-min. Slave output (100W). This version is ideal for use in smaller rooms such as entrances and toilets.

PIR MinMaxOff

Infrared motion sensor which alternate between max light 100% when presence and min 10% after preset time, 10-min, without detection. After additional delay the light turns off (eligible). All settings are made via DIP-swithes on the fitting or via remote control (accessories). This version is ideal for use in smaller rooms such as entrances and toilets.

Radar MinMaxOff

Infrared motion sensor which alternate between max light 100% when presence and min 10% after preset time, 10-min, without detection. After additional delay the light turns off eligible). All settings are made via DIP-swithes on the fitting. This sensor is suitable when longer range and high sensitivity are requested. This version is ideal for use in larger areas such as staircases and corridors.

RF Radar MinMaxOff

LedgeCircle® RF is a Radar MinMaxOff fitting with a built-in radio device that enables communication between fittings. The combination of motion detection, communication and lighting controls makes LedgeCircle® RF ideal for applications like stairways and corridors where you want the light to be off or at a reduced level when no one is present, while providing ideal lighting whenever it’s needed. Setting of the RF version requires a remote control. For more information please see separate RF manual on www.defa.com.

LightAdjust

Fittings marked with “LightAdjust” are equipped with a setting which makes it possible to set the preferred light level in 8 steps, from 440 up to 1340 lumen. By delivery the fittings are set on 1000 lumen.

Boosting of the MinMaxOff versions

All LedgeCircle D300 ES with MinMaxOff can be boosted in 5 steps by the dip-switches on the driver. See more information on the product sheet under Downloads.