Termini 1700W interior heater, seen angled from below

Termini™ II 1700

Interior heater w. Schuko plug

Get into a warm car with ice-free windows. Termini™ II 1700 is a powerful and compact interior heater ideal for medium-sized and large vehicles.

Item no: 430068
See specifications
For consumers:
🇧🇬🇷🇴🇬🇷Klema (Akulator)
Shortcuts:

Description

Termini™ II 1700 is a compact and highly efficient interior heater ideal for medium-sized to large vehicles and low winter temperatures. It has two output settings: 830W and 1700W at -25°C, operated with a switch. A PTC heating element (PTC = Positive Temperature Coefficient) ensures that as the interior temperature reaches target levels, power output and consumption is reduced. This version comes with a Schuko plug.

Termini™ II 1700 is controlled with the manual ON/OFF switch.

Technical description

Effect:
Termini™ II 1700 has two power levels, controlled by a switch.
Level 1: 830W (at -25°C)
Level 2: 1700W (at -25°C)

Termini™ II 1700 comes with Schuko plug:
Item no: 430068

Safety:
The heater is equipped with an automatic overheating circuit breaker. This breaker is tripped at 55°C, and it is reset by disconnecting the plug and leaving the interior heater switched off until it cools down (about 30 minutes). There is also a lead fuse (+80°C) for additional protection. If this fuse is blown, the interior heater must be sent for repair.

Note! Talk to your dealer if you are unsure which interior heater is best suited for your needs!

DEFA AS conforms to the requirements of both ISO 9001- 2008, ISO 14001:2004 and OHSAS 18001:2007. In addition, our engine heaters and cables conform to the requirements of ISO/TS 16949:2002.

Voltage
Output at minus 25°C
Output at plus 25°C
Rated output/power
Take-off power, max
Temperature range of use
Size
Weight
Bracket
IP rating
Insulation class
Certification(s)
230V +5%/-10%
0/830/1700
0/650/1350
1700W
2200W
-40°C / +50°C
138x36x182mm
0,665kg
20g
IP20
II
EN60335-1, EN50408, EN55014-1 / 2, EN61000-3-2 / 3-3

Mounting

Termini™ II 1700 is designed for fixed installation in a car’s interior. It can be mounted upside down under the glove compartment, on the center console or on the passenger side of the A-pillar.

* Do not mount the heater with the blower opening pointed downwards or towards the seat and do not install it on the floor.
* The appliance is not intended for use by children or by persons with reduced physical or mental capabilities, or lack of experience and knowledge.
* In order to avoid overheating, do not cover the interior heater.

Install the heater according to the installation guide.

Downloads

Product sheet (pdf)
Termini™ II Installation guide (1) (pdf)
Termini™ II Installation guide (2) (pdf)